Factory Provide Open Source 64 Bit Dual Core Rk3399 Orange Pi 4 Lts

• Type: Rigid Circuit Board
• Dielectric: FR-4
• Material: Synthetic Fiber
• Flame Retardant Properties: V0
• Mechanical Rigid: Rigid
• Processing Technology: Electrolytic Foil
• Model NO.: YCT-TM021
• Base Material: Copper
• Insulation Materials: Epoxy Resin
• Model: FR-4
• Transport Package: Carton Box
• Specification: 25*25*10
• Origin: China
• HS Code: 8537109090
• Production Capacity: 50000 PCS / Year

Product Description

4G+64G DDR4 EMMC rockchip android board RK3399 motherboards with 1000M Ethernet
 for

Android and Linux Ubuntu OS

Orange Pi 4 LTS uses the Rockchip RK3399(28nm HKMG Process), and has 3 GB /4GB LPDDR4 SDRAM, 16GB EMMC Flash(option). It can run Android 8.1,Ubuntu16.04,Ubuntu18.04,Debian9. Orange Pi 4 LTS offers a range of different ports, including HDMI output, 26pin headers, LCD connector, Gbps Ethernet port, 2*USB 2.0, 1*USB 3.0, 1*USB 3.0 TYPE-C, mini PCIE connector etc. It is powered through DC and Type-C. It is a good choice for applications that need strong networking perfomance.
Orange Pi 5 is for anyone who wants to start creating with technology- not just consuming it. lt's a simple, fun, useful tool that you can use to start taking control of the world around you.

Hardware Specification
SOC	Rockchip RK3399 (4GB)
	Rockchip RK3399-T(3GB)
CPU	• Based on the large and small size of big.LITTLE core architecture:Dual-core Cortex-A72 (large core)+ Quad-core Cortex-A53(small core)
	• 6-core ARMR64-bit processor ,main frequency speeds up to 1.6GHz(3GB)/1.8 GHz(4GB)
GPU	• High-performance Multi-core Mali-T860 GPU
	• Supports OpenGL ES1.1/2.0/3.0/3.1,OpenVG1.1,OpenCL,DX11
	• Support for AFBC
PMU	RK808 PMU
Memory	3 GB /4GB LPDDR4
Onboard Storage	• 16GB EMMC Flash (option)
	• MicroSD (TF) Card Slot
Onboard Ethernet	Support 10/100M/1000M Ethernet (YT8531C)
Onboard WiFi+BT	• CDW.20U5622-00
	• Support IEEE 802.11 a/b/g/n/ac, 2T2R • Support BT 5.0
Video	• HDMI 2.0,Supports 4K@60fps output
	• 1* DP 1.2(Display Port), Supports 4K@60fps output
	• Supports Dual MIPl-DSI ( 4 lines Per Channel )
Audio	• Output: 3.5mm Jack and HDMI2.0a
	• lnput: MIC
Camera	2 * MIPI-CSl Camera Connector (MIPI_RXO,MIPI_TX1/RX1)
USB	2 * USB2.0 ,1*USB3.0,1 * USB3.0 Type-C
Debug UART	3 Pin
GPIO	26 Pin
PCIe	Support Mini PCIe port
Key	Upgrade Key & Reset Key
Power Supply	DC 5V/3A or 5V/4A, TYPE-C 5V/4A
LED	Power led & Status led
Supported OS	Android, Ubuntu, Debian
Appearance specification introduction
Dimension	56mm*91mm
Weight	49g

 

PCB Techinecal Capacity
Layers		Mass production: 2~58 layers / Pilot run: 64 layers
Max. Thickness		Mass production: 394mil (10mm) / Pilot run: 17.5mm
Materials		FR-4 (Standard FR4, Mid-Tg FR4,Hi-Tg FR4, Lead free assembly material) , Halogen-Free, Ceramic filled , CAD, Polyimide, BT,PPO, PPE, Hybrid, Partial hybrid, etc
Min. Width/Spacing		Inner layer: 3mil/3mil (HOZ), Outer layer: 4mil/4mil(1OZ)
Max. Copper Thickness		6.0 OZ / Pilot run: 12OZ
Min. Hole Size		Mechanical drill: 8mil(0.2mm) Laser drill: 3mil(0.075mm)
Surface Finish		HASL,Immersion Gold, Immersion Tin, OSP, ENIG + OSP, Immersion Silver, ENEPIG, Gold Finger
Special Process		Buried Hole, Blind Hole, Embedded Resistance, Embedded Capacity, Hybrid, Partial hybrid, Partial high density, Back drilling, and Resistance control

 
 

Product Description

 

PCBA technical Capacity
Advantages		----Professional Surface-mounting and Through-hole soldering technology
		----Various sizes like 1206,0805,0603 components SMT technology
		----ICT(In Circuit Test),FCT(Functional Circuit Test)
		----PCB Assembly With UL,CE,FCC,Rohs Approval
		----Nitrogen gas reflow soldering technology for SMT.
		----High Standard SMT&Solder Assembly Line
		----High density interconnected board placement technology capacity.
Components		Passive Down to 0201 size, BGA and VFBGA, Leadless Chip Carriers/CSP
		Double-sided SMT Assembly, Fine Pitch to 0.8mils, BGA Repair and Reball
Testing		Flying Probe Test,X-ray Inspection AOI Test
SMT		Position accuracy: 20 um
		Components size: 0.4×0.2mm(01005) -130×79mm, Flip-CHIP, QFP, BGA, POP
		Max. component height: 25mm
		Max. PCB size: 680×500mm
		Min. PCB size: no limited
		PCB thickness: 0.3 to 6mm
Wave-Solder		Max. PCB width: 450mm
		Min. PCB width: no limited
		Component height: Top 120mm/Bot 15mm
Sweat-Solder		Metal type: part, whole, inlay, sidestep
		Metal material: Copper, Aluminum
		Surface Finish: plating Au, plating sliver, plating Sn
		Air bladder rate: less than 20%
Press-fit		Press range: 0-50KN
		Max. PCB size: 800X600mm

Our Advantages

Our products used in various fields such as consumer electronics, industrial control, telecommunication, computer and medical. Wedo not only offer the simple Fr4 PCB but also Alu PCB, Ceramic ALN and AL2O3, metal and copper base PCB, Rigid-flex board, heavycopper and etc.

Company Profile

Shenzhen Yongchangtai Co., Ltd. Was established in Shenzhen city in 2009.

Yongchangtai has been a large-scale comprehensive research and development manufacturing enterprise in the field of electronic products, almost covering all kinds of home appliance controllers, device controllers, home intelligent controllers, lighting products, new energy products, etc. Yongchangtai business has extended to OSRAM in China,as well Europe, USA and Southeast Asia. Main customers were many domestic and foreign well-known included EUPA, TCL, Huawei and so on. Yongchangtai is a professional manufacturer of PCBs, which are widely applicable to consumer electronics, telecommunication products, medical equipment and prototypes.We offer one-stop service for hardware and schematic design, board layout, component selection, firmware design, and mechanical design to PCBA and chip cloning. We can also help you procure components as well as provide PCB FPC and mold making, plastic injection, assembly, packaging and shipment services. In addition, our raw material and key components are sourced from famous suppliers such as Sharp, Toshiba, ST, Samsung, Infineon, Ti,ON,Microchip and so on. Our Facilities and Workforce We have 3,000 square meters workshop with 360 workers. The equipment includes Panasonic CM402,DT401,DT301.Three high speed auto SMT lines.Our 12 R&D engineers with over 10 years of experience worked in FOXCONN, Flextronics , Huawei, HP. They develop new items to update our catalog monthly. Moreover, we have 20 QC auditors with three years of experience who use advanced testing equipment such as AOI, BGA X-ray and PCB E-test to ensure all our products comply with IECQ-HSPM QC 080000, CE, UL and RoHS certifications.
 

Certifications

 

 

FAQ

 

1. who are we?
We are based in Guangdong, China, start from 2009,sell to Northern Europe(15.00%),Eastern Europe(15.00%),Africa(15.00%),North America(15.00%),Western Europe(10.00%),South America(10.00%),South Asia(5.00%),Southeast Asia(5.00%),Domestic Market(2.00%),Eastern Asia(2.00%),Mid East(2.00%),Central America(2.00%),Oceania(2.00%). There are total about 301-500 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
PCBA,PCB Assembly,printed circuit board assembly,electronic circuit board,electronic boards

4. why should you buy from us not from other suppliers?
Advanced equipments, high skilled sales and manufacturing teams, excellent quality,over 10 years' focus on electronic components,manufacturing and full assembly, our customers such as Faurecia,Midea, etc.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CPT,DDU,Express Delivery;
Accepted Payment Currency:USD,HKD,CNY;
Accepted Payment Type: T/T,Credit Card,PayPal,Western Union;
Language Spoken:English,Chinese

After Sales Service

Pre-Sale and After-Sale Service
1 Hour quotation
2 hours complaint feedback
7*24 hour technical support
7*24 order service
7*24 hour delivery
7*24 production run

 

About US

1. 15 years experience in PCBA
2. Strong R&D team over 70 people
3. Factory passed ISO9001 quality system certification
4. Big workshop area of over 3500 square meters with more than 200 employees.
5. Have a senior R&D team, with hardware engineers, software engineers, product engineers and so on, can undertake all kinds of OEM/ODM orders processing and production;
6. One-stop production of the factory, from PCB patch. Plug-in. Test. Assembly. Packaging and shipment are completed in this factory, reducing the flow of intermediate links;
7.We can support drop-shipping for 1pcs, welcome to order, and welcome to visit the factory.