Original GSM Module SIM900A SIM900 Mini Wireless Data Transmission GPRS Board Kit with Antenna

• Type: Rigid Circuit Board
• Dielectric: FR-4
• Material: Synthetic Fiber
• Flame Retardant Properties: V0
• Mechanical Rigid: Rigid
• Processing Technology: Electrolytic Foil
• Model NO.: YCT-TM338
• Base Material: Copper
• Insulation Materials: Epoxy Resin
• Model: FR-4
• Transport Package: Carton Box
• Specification: 25*25*10
• Origin: China
• HS Code: 8537109090
• Production Capacity: 50000 PCS / Year

Product Description

Original GSM Module SIM900A SIM900 Mini Wireless Data Transmission GPRS Board Kit with Antenna

 

Product Parameters

Features:

The onboard two set power supply interface VCC5 5V power supply, VCC4 interface, 3.5--4.5V power supply, optional power on self starting (default) and control start.
The onboard SMA (default) and IPXmini antenna interface, SIM900A interface reserved reset.
The size of the module is 49*50, all the new and original device.
The computer can give early computer debugging USB module power supply, a very large amount of data under the condition of the recommended current more than 1A. Standby dozens of MA data can be set to provide dormancy, dormancy of 10MA low power. Support 2, mobile phone 3,4G card.
The serial port circuit: support for 3.3V single chip microcomputer. TTL serial port support
3.3 and 5V single chip microcomputer.
The SIM card circuit to increase the SMF05C ESD chip.
Antenna circuit: guarantee short and straight, so as to ensure the signal strength.
PCB display screen printing mark: each interface, convenient development two times, the SIM900/A hardware is completely follow the design when the design manual.
Two power supply interface: VCC5, 5V DC above 1A. Computer 5V power supply can be early computer USB. DC long data circuit over larger recommended 5V1A. VCC4, 3.5--4.5V power supply, ibid., suitable for lithium battery.
Control pin all leads.
A TTL level, compatible with 3.3V and 5V.
The two antenna interface, the default SMA straight head, connector for IPXmini antenna.
One way of speech interface, the way Mike interface.
The control interface of each pin description:
GND - GND
SIMR SIM900A RXD, TTL level, can not be directly connected to the 232 level
SIMT SIM900A TXD, TTL level, can not be directly connected to the 232 level
RST - SIM900A reset, active low
VCC_MCU when the SIM900A module and 5V TTL level communication, this pin is connected to DC 5V; when the level of communication of SIM900A and 3.3V TTL, this pin is connected to DC 3.3V.
VCC5----DC 5V input.
VCC4------DC3.5--4.5 input

Onboard Resources:
Serial port circuit(with protection)
Antenna interface circuit(SMA bend female port)
SIM card circuit(flip SIM slot)
4*3.5 fixture hole 4pcs
SIM900A serial port output terminal
 

 

PCB Techinecal Capacity
Layers		Mass production: 2~58 layers / Pilot run: 64 layers
Max. Thickness		Mass production: 394mil (10mm) / Pilot run: 17.5mm
Materials		FR-4 (Standard FR4, Mid-Tg FR4,Hi-Tg FR4, Lead free assembly material) , Halogen-Free, Ceramic filled , Tef, Polyimide, BT,PPO, PPE, Hybrid, Partial hybrid, etc
Min. Width/Spacing		Inner layer: 3mil/3mil (HOZ), Outer layer: 4mil/4mil(1OZ)
Max. Copper Thickness		6.0 OZ / Pilot run: 12OZ
Min. Hole Size		Mechanical drill: 8mil(0.2mm) Laser drill: 3mil(0.075mm)
Surface Finish		HASL,Immersion Gold, Immersion Tin, OSP, ENIG + OSP, Immersion Silver, ENEPIG, Gold Finger
Special Process		Buried Hole, Blind Hole, Embedded Resistance, Embedded Capacity, Hybrid, Partial hybrid, Partial high density, Back drilling, and Resistance control

 
 

Product Description

 

PCBA technical Capacity
Advantages		----Professional Surface-mounting and Through-hole soldering technology
		----Various sizes like 1206,0805,0603 components SMT technology
		----ICT(In Circuit Test),FCT(Functional Circuit Test)
		----PCB Assembly With UL,CE,FCC,Rohs Approval
		----Nitrogen gas reflow soldering technology for SMT.
		----High Standard SMT&Solder Assembly Line
		----High density interconnected board placement technology capacity.
Components		Passive Down to 0201 size, BGA and VFBGA, Leadless Chip Carriers/CSP
		Double-sided SMT Assembly, Fine Pitch to 0.8mils, BGA Repair and Reball
Testing		Flying Probe Test,X-ray Inspection AOI Test
SMT		Position accuracy: 20 um
		Components size: 0.4×0.2mm(01005) -130×79mm, Flip-CHIP, QFP, BGA, POP
		Max. component height: 25mm
		Max. PCB size: 680×500mm
		Min. PCB size: no limited
		PCB thickness: 0.3 to 6mm
Wave-Solder		Max. PCB width: 450mm
		Min. PCB width: no limited
		Component height: Top 120mm/Bot 15mm
Sweat-Solder		Metal type: part, whole, inlay, sidestep
		Metal material: Copper, Aluminum
		Surface Finish: plating Au, plating sliver, plating Sn
		Air bladder rate: less than 20%
Press-fit		Press range: 0-50KN
		Max. PCB size: 800X600mm

Our Advantages

Our products used in various fields such as consumer electronics, industrial control, telecommunication, computer and medical. Wedo not only offer the simple Fr4 PCB but also Alu PCB, Ceramic ALN and AL2O3, metal and copper base PCB, Rigid-flex board, heavycopper and etc.

Company Profile

Shenzhen Yongchangtai Co., Ltd. Was established in Shenzhen city in 2009.

Yongchangtai has been a large-scale comprehensive research and development manufacturing enterprise in the field of electronic products, almost covering all kinds of home appliance controllers, device controllers, home intelligent controllers, lighting products, new energy products, etc. Yongchangtai business has extended to OSRAM in China,as well Europe, USA and Southeast Asia. Main customers were many domestic and foreign well-known included EUPA, TCL, Huawei and so on. Yongchangtai is a professional manufacturer of PCBs, which are widely applicable to consumer electronics, telecommunication products, medical equipment and prototypes.We offer one-stop service for hardware and schematic design, board layout, component selection, firmware design, and mechanical design to PCBA and chip cloning. We can also help you procure components as well as provide PCB FPC and mold making, plastic injection, assembly, packaging and shipment services. In addition, our raw material and key components are sourced from famous suppliers such as Sharp, Toshiba, ST, Samsung, Infineon, Ti,ON,Microchip and so on. Our Facilities and Workforce We have 3,000 square meters workshop with 360 workers. The equipment includes Panasonic CM402,DT401,DT301.Three high speed auto SMT lines.Our 12 R&D engineers with over 10 years of experience worked in FOXCONN, Flextronics , Huawei, HP. They develop new items to update our catalog monthly. Moreover, we have 20 QC auditors with three years of experience who use advanced testing equipment such as AOI, BGA X-ray and PCB E-test to ensure all our products comply with IECQ-HSPM QC 080000, CE, UL and RoHS certifications.
 

Certifications

 

 

FAQ

 

1. who are we?
We are based in Guangdong, China, start from 2009,sell to Northern Europe(15.00%),Eastern Europe(15.00%),Africa(15.00%),North America(15.00%),Western Europe(10.00%),South America(10.00%),South Asia(5.00%),Southeast Asia(5.00%),Domestic Market(2.00%),Eastern Asia(2.00%),Mid East(2.00%),Central America(2.00%),Oceania(2.00%). There are total about 301-500 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
PCBA,PCB Assembly,printed circuit board assembly,electronic circuit board,electronic boards

4. why should you buy from us not from other suppliers?
Advanced equipments, high skilled sales and manufacturing teams, excellent quality,over 10 years' focus on electronic components,manufacturing and full assembly, our customers such as Faurecia,Midea, etc.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CPT,DDU,Express Delivery;
Accepted Payment Currency:USD,HKD,CNY;
Accepted Payment Type: T/T,Credit Card,PayPal,Western Union;
Language Spoken:English,Chinese

After Sales Service

Pre-Sale and After-Sale Service
1 Hour quotation
2 hours complaint feedback
7*24 hour technical support
7*24 order service
7*24 hour delivery
7*24 production run